5% off 350 Meters Truck Mounted Water Well Drilling Rig Well Drilling Supplies Borehole Truck for Sale

• Customization: Available
• After-sales Service: Video Technical Support, Online Support, Spare PAR
• Warranty: Video Technical Support, Online Support, Spare PAR
• Model NO.: MWT350
• Certification: CE, RoHS, ISO 9001:2000, ISO 9001:2008
• Condition: New
• Motor: DC Motor
• Drill Hole Diameter: 250-300mm
• Drill Hole Depth: >200m
• Bit Type: Diamond Bit
• Drilling Way: Impactor
• Type: Four-Wheel trailer
• Transport Package: Container
• Specification: 11000*2500*4100mm 24000kg
• Trademark: D Miningwell
• Origin: Zhejiang
• HS Code: 8430490000
• Production Capacity: 10 Sets Per Month

Product Description

D Miningwell 350 meters Water well drilling rig Truck mounted drill rig with air compressor Borewell rig

The MWT-350 vehicle -mounted water well drilling rig uses a new SINO HOWO truck. chassis and is equipped with a 25 bar two-stage compression high-pressure air compressor. Its lifting force can reach 22 tons, and it can drill water wells with a maximum depth of 350 meters.

MWT 350  Water Well Drilling Rig Specification
The hole diameter	140-325mm	Drill pipe diameter	φ89 φ102
Drilling depth	350m	Drill pipe length	1.5m 2.0m 3.0m 6.0m
One- time advance length	6.6m	Rig lifting force	22T
Walking speed	2.5 km/h	Rapid rise speed	18 m/min
Equipped capacitor	92kw	Fast feeding speed	33 m/min
Using air pressure	1.7-3.4 MPA	Hoisting force of winch	2T
Air consumption	17-36 m3/min	Swing torque	6200-8500 N.m
Swing speed	66-135 rpm	Equipped with hammer	Medium and high wind pressure series
The penetration efficiency	15-35 m/h	The engine brand	Ychai engine

 

Application: Drill Water Wells
Capacity
Hole Diameter : 140 - 325 mm (51/2" - 13")
Maximum Depth: 350 m @ 203 mm (8") diameter
Drilling Method : DTH and Rotary Drilling

Prime mover
Option 1: Use the PTO system and use the transfer gearbox to take the power from the truck engine (290hp/336hp/371hp) to drive the hydraulic system.
Option 2: Use a 92kw diesel engine for the individual configuration of the drilling rig.

Platform Structure
Heavy I and C section welded steel structure covered with 5mm chequered plate

Mast Assembly
The compound drill boom is lifted by double oil cylinders, which increases the lifting force and reduces the transport size.
Mast Overall Length : 8000 mm
Rotary Head Travel : 6600mm
Rod Handling :6m
Centralizer Opening : 14" (355mm)

Mast Raising Cylinder :Mast is raised and lowered by double hydraulic cylinder

Feed System
1 x Double acting hydraulic cylinder with 1:3 rope reeving system
 Pull Up Force : 22Tom @ 200 bar
Pull Down Force : 10 - 110Tom @ 200 bar
Pull Up Speed : 18 m/min
Pull Down Speed : 33 m/min

Rotary Head Assembly
Self-developed fabricated steel body with spur gear reduction
and oil bath lubrication, driven by dual hydraulic motors.
Maximum Torque : 8500 Nm
Rotation Speed : 66 - 135 rpm Fine controlled

Hydraulics
2 x Fixed displacement pump for Feed and Rotation
1 x Fixed displacement pump for Mud pump
3 x Fixed displacement pump for Hydraulic cooler, Auxiliary operations and Micro feed.
Maximum System Pressure : 2900 psi (200 bar)
 Hydraulic Oil Cooler : 70 gpm
Hydraulic Tank Capacity : 600 litres

Control Panel
Centralized control panel is at rear end of the equipment for convenient view of drill table provided with all necessary gauges, control system and emergency switch. Locking arrangement is
provided for the safety of control panel.

Breakout Wrench
4 x Hydraulic levelling jacks are provided for quick setting andLevelling Jackslevelling with heavy duty telescopic guides. Locking check valves for safety with adequate capacity to withstand load.

Water/ Foam Injection Pump
Hydraulic operated breakout wrench provided for fast breaking of rod joints
Hydraulic operated water injection triplex pump with necessary fittings, pressure regulator, flow regular, check valve and suction filter are provided.
Maximum Flow : 80 Ipm
Maximum Pressure : 40 kg/sq.cm

Single Rod Changer
Manually operated single rod changer to couple drill pipe to Rotary head

Winch
Hydraulic operated auxiliary winch to load drill pipe into rod changer with a lifting capacity of 1 ton.

Welding Machine
Hydraulic driven semi brushless welding alternator is provided for welding casing pipes
Recommended Weld rod size : 2.5 mm to 5 mm only
Weld current : 300 amps @ 60% duty cycle
Optional single phase : 6.0 kVA @ 220v, 50 Hz

Airline Lubricator
A positive acting venturi type inline lubricator is provided for injecting oil to the down hole hammer.
Tank capacity : 15 litres 
Working pressure : 350 psi

Recommended Air Compressor 
MININGWELL/ATLAS COPCO/LIUTECH
Air Compressor Capacity:
1100CFM - 25 BAR - 309kW engine 
1300CFM - 30 BAR - 410kw engine 

Mud Pump
Hydraulic operated BW 450 Mud Pump (6" x 6") 
Stroke : 6" (152 mm)Mud Pump
Liner size diameter : 6" (152 mm)
Displacement (Max recommended) : 450 L/min
Maximum working Pressure : 3Mpa

Additional Fitments
Night Lights, Tools box, Hammer stand

User Manual
Manual for Operation, Maintenance and Spare Parts

Truck Option
SINO HOWO Truck: 6*4/6*6/8*4
Dongfeng Truck: 6*4/6*6/8*4
Shacman truck: 6*4/6*6/8*4